Last weekend, almost 60 of our closest family and friends joined us at ABC Microbrewery for our co-ed baby shower! We called it the “Brewing Baby Smied” shower, and it was a blast!
My mom was the generous hostess of this shower, and originally booked the outdoor beer garden to have a low-key, outdoor shower. But we woke up that morning to 80 degree temperatures, 90% humidity, and a 70% chance that the radar was going to stay looking like this:
So, we made the call to move it inside. Silver lining: when we showed up to setup – we realized that there was a GIANT chalkboard wall (yes!), and a large projector screen above it. This meant that I could be in chalkboard heaven, and Jeremy could put on the Michigan vs. UCF game for all of the Michigan fans that would be there. WIN-WIN!
My mom and sister-in-law Allison helped a TON with prep – including spending roughly 800 hours of their lives making the favors. These were small jars of Framboise jam (recipe)…so super cute, but also really labor intensive.
Usually when I go to parties/showers, or even just out to eat in general, I have a really hard time finding something to eat with my food allergies. So when we had an allergy-friendly dessert table with Whole Foods-crafted regular cupcakes, gluten free cupcakes, and a vegan carrot cake…I was pretty excited. And by excited, I mean I ate 3 pieces of cake – I’m not even ashamed.
I made the “Cheers, baby!” bunting for the top of the cake from this printable chalkboard bunting, bakers twine, and bamboo skewers.
Look at this guy – a natural already 🙂
We received so many amazing, thoughtful gifts for our little one, and had a great time. We are so thankful to everyone who traveled to celebrate with us!
I’m really loving this super-summery weather here in Michigan lately! We did have one day of melt-your-face-off 95 degree heat, but other than that it has been perfect outside. Nothing is better than being able to throw open all of the windows in the house, make an Arnie Palmer, and spend the day outside.
We’ve spent a lot of time the last few weeks ripping out all of the front/side landscaping to start from scratch. So far we have:
Endless Summer Hydrangeas
Boxwoods
Japanese Maple
Peonies
Lavender
Salvia
Creeping Sedum
It looks a million times better, no? Plus I love being able to cut fresh flowers for the house. Peonies + Hydrangeas = gorgeous. I just wish peonies bloomed longer, they’re a lot like avocados: not ready, not ready, not ready, not ready, not ready, n-READY! Too late.
We also took on a little side project with my nephew, he’s been asking forever if we can plant sunflowers at the house. Of course I can never say no to that sweet little face. So I spent a week sprouting the seeds, and then he and my niece came over to plant the seeds in their own containers – how cute is their little handwriting?!
These days I’ve been trying to find ways to give the house a summery feel. I took off the bow and garland from my St. Patrick’s Day Burlap Wreath, and made a simple little navy/white bunting for the front door.
We also set out some of Jeremy’s summer beer coasters – how cute manly are these? I’m considering putting up a tutorial on how to make these – if you’re interested, let me know in the comments!
I also whipped up this new chalkboard – inspired by a current pregnancy craving of mine 🙂 Watermelon is the BEST in summer, pregnant or not.
How are you enjoying this beautiful summer weather?
We’ve had a stretch of seriously gorgeous weather here in Michigan over the last week – sunny, 70-80 degrees, and I love it! When the weather is nice, I can’t stay inside, so we’ve been focusing on mostly outdoor projects for the time being. One of the areas that’s been in desperate need of some love is our three season front porch, it is the cutest area that totally sold me on the house the first time we came to look at it.
Ever since we moved in a few years ago, I’ve dreamed of turning our little porch into a cozy seating area where we can sit and have breakfast, drink coffee, and people watch on pretty spring/summer/fall mornings. I can also picture snuggling out here with Baby Smied someday 🙂 My inspiration has always been this photo: blue beadboard ceiling (so southern!), wicker furniture + white cushions.
We have a seating area in the works thanks to my mother-in-law who gifted us Jeremy’s Grandma’s old wicker furniture, that we repaired/refinished and will be featuring in an upcoming post! First though, I wanted a little curb appeal. I’ve always loved oversized signs on porches that can be read from the street, I find them so welcoming and charming, and we had just the perfect blank wall space right next to our front door.
My original inspiration for this piece was this sign I found online – I often see things like this and think “I can make that myself!”
Materials List
1/4″ piece of plywood (we used birch leftover from our bed project)
Chalkboard Paint
White Paint
Small Foam Roller
Small Paintbrush (fine tip)
White Chalk (I used my trusty old Crayola)
Pencil
Dropcloth
2 Wall Screws
2 Eyelet Screws
Drill
I used a piece of scrap birch plywood from our bed project for this, that just happened to be the right size for the space. You’ll need to cut the plywood down to 12″ x 48″ if you want a sign this size.
For the letters, I printed out each letter of “welcome” in the Archer Bold font, size 500. Trim the letters down and lay them out to be sure they fit, and you’re happy with the font size.
Lay out your dropcloth, place the birch on top, and paint with 2-3 coats of chalkboard paint. I didn’t prime beforehand, and find that I get the nicest finish by using a foam roller – don’t forget to paint the sides!
As you can see, I’ve gotten a LOT of use out of this little quart of chalkboard paint. I may or may not have also spilled some on the basement floor at one time…oops.
For chalkboard lettering, I often freehand, but I’m going to share a little secret with you if you don’t love your handwriting: the Transfer Method. For this sign I wanted the spacing to be as uniform as possible, which can be really hard to freehand, especially with a vertical orientation. Lay your letters out on the board exactly where you want them. Tape each piece to the board on the left side to hold it in place. For extra precision, have a cat come give it a second look to ensure it’s laid out correctly.
Perfect. Thanks, Murph.
Next, follow these steps for each letter:
While keeping the paper taped to the board, flip the page over and smear chalk on the back side of the paper. Flip the paper back over, and firmly trace the letter with a sharpened pencil. This will transfer the chalk outline to your sign – easy peasy.
I used a spare white chalk marker to darken the outline so I could ensure a really clean edge before painting – this step is optional. There will be leftover chalk dust on the sign, but you can wipe that off with a damp towel once the paint has dried. Once all of the outlines are done, it’s time to paint!
For the letters, I used some spare Benjamin Moore White Dove (my favorite white of all time) that we had lying around. This step is simple – with a small artist’s paintbrush, just stay within the lines! I only did one coat because I wanted this sign to have a handmade/imperfect feel, and one coat will leave just enough of an uneven finish for that. Once you’re done painting, let it dry for a few hours (I left mine overnight).
Now it’s time to hang your sign! I wanted mine to hang from eyelet screws, it reminds me of old gas station/Americana signs which are just adorable. Thankfully, we had two old screws in just the right place from some swag hooks we tried to remove when we moved in. I’m not exaggerating when I say there were no fewer than 5 swag hooks in each room of this house when we moved in…I would post photos for proof, but that would require a blog post of it’s own. Let’s just say that no one needs that many swag hooks. EVER.
Measure where you’d like your wall screws and eyelet screws to match up, and drill pilot holes to avoid splitting the wood. We used a 5/32 bit for this. Then slowly screw in the eyelets. Hang on the wall screws, ensuring everything is level. You can adjust the eyelet screws by a few turns if you need to adjust to make it level.
This handsome fella has a serious love for everything Dewalt.
Now you’re done: instant curb appeal! It was such a short and simple project (my favorite kind!), that cost $0 because I was able to use materials I already had lying around. What a cute result! What do you think? Hopefully this will inspire you to make your own!
My mom was the generous hostess of this shower, and originally booked the outdoor beer garden to have a low-key, outdoor shower. But we woke up that morning to 80 degree temperatures, 90% humidity, and a 70% chance that the radar was going to stay looking like this:
So, we made the call to move it inside. Silver lining: when we showed up to setup – we realized that there was a GIANT chalkboard wall (yes!), and a large projector screen above it. This meant that I could be in chalkboard heaven, and Jeremy could put on the Michigan vs. UCF game for all of the Michigan fans that would be there. WIN-WIN!
Usually when I go to parties/showers, or even just out to eat in general, I have a really hard time finding something to eat with my food allergies. So when we had an allergy-friendly dessert table with Whole Foods-crafted regular cupcakes, gluten free cupcakes, and a vegan carrot cake…I was pretty excited. And by excited, I mean I ate 3 pieces of cake – I’m not even ashamed.
I made the “Cheers, baby!” bunting for the top of the cake from this printable chalkboard bunting, bakers twine, and bamboo skewers.
Look at this guy – a natural already 🙂
We received so many amazing, thoughtful gifts for our little one, and had a great time. We are so thankful to everyone who traveled to celebrate with us!
We also set out some of Jeremy’s summer beer coasters – how 
I also whipped up this new chalkboard – inspired by a current pregnancy craving of mine 🙂 Watermelon is the BEST in summer, pregnant or not.
My original inspiration for this piece was 
This handsome fella has a serious love for everything 
